4 Types of Washers and Effective Laundry Room Maintenance
A washing machine completely eliminates all efforts to wash clothes. It’s extremely convenient. All you need is to prepare the detergent and then toss the dirty clothes to the washer. However, washing machines also vary. There are washers that use more water while high-efficient washers use only enough to conserve water and help consumers reduce their water bills.
Below are the 4 types of washers available for consumers. We have also provided some tips to help you maintain your laundry room. Do not forget to always call a plumber in Minneapolis, MN for better installation of your washer.
Traditional Agitator Top Loaders
Also considered as a standard washing machine, this type has a central rod that does the cleaning by moving clothes around. It carries fewer clothes, uses more water and may not be gentle on the fabrics. Although it doesn’t look stylish compared to the other types, it does prevent you from stooping down to put in more clothes. It also allows you to just toss in additional clothes you would like to clean while it’s running. Traditional top-loaders are affordable and faster than other models. Cleaning results are just good.
Impeller Top Loaders (High-Efficient)
Unlike the traditional top loaders, this type provides more capacity and is more gentle on clothes. They also feature sensors that determine just the right water level for saving energy and reducing drying time. One downside includes longer wash cycles compared to the standard washers. Also, they may require some detergent designed for high-efficiency washers.
Standard Front Load Washers
Highly efficient at cleaning clothes, this type spins more than 1200 RPM. It can also effectively remove moisture from clothes to reduce the drying process. You can load up more clothes as it has more storage capacity. These washers are gentle on clothes and use less water than top loaders.
High-Efficiency Front Load Washers
Designed for excellent operation, this type uses low energy and less water. When you use this type, expect to have lower utility bills than when you are using the standard washer. There is one downside to this — you may experience bad odors and mold. Fortunately, it can be prevented. Make sure you give it some little extra care — follow the manufacturer’s instructions and guides for proper maintenance of this washer. Do buy it from a trusted source and don’t forget to inquire about what type of warranty repairs are included and on the return policy too.
How to Maintain Your Laundry Room
The laundry room is where you keep laundry-related supplies and equipment. With a dedicated room, you won’t need to pile your dirty clothes somewhere. Having a laundry room keeps you organized. This is why you need to also maintain this to prevent problems that may require the services of a plumber in Minneapolis, MN.
Below are some tips for keeping your laundry room plumbing in top shape:
Check Hoses Regularly
You will usually find them at the back of your washing machine. Constantly check them for cracks or other damages. Rubber hoses usually begin to wear out after several uses. As soon as your hoses are damaged, talk to a plumber to help you resolve the problem. He may ask you to completely replace them. It may be a good idea to go with a steel hose over the rubber as the former is stronger and lasts longer.
For the laundry plumbing, the supplies are usually at the back of the machine. Once a year, make it a point to check the supply line for leaks, bubbles and cracks. Call your plumber right away for assistance.
Secure the Exposed Pipes
If you do not want the pipes to shake while using the washing machine, it will be best to at least tie them with a rope. Make sure that the hoses are also completely attached to the washing machine.
Clean the Laundry Drains
A functional laundry room will feature a floor drain for drainage purposes. If you want your laundry room to keep smelling fresh and clean, make it a habit to pour a bucket of warm water down the drain to prevent bad smells as sometimes the gases in the sewer pipes may seep into the laundry room. Do this at least once a month. If the sewer-like smell comes from the washing machine, try the baking soda and vinegar solution for eliminating the bad smell. In addition, try adding a drain filter for catching those debris and other particles. The filter should prevent drain clogs too. Call your plumber if the smell does not go away.
If you have laundry strainers, it is also best to clean them at least once a month. Strainers usually collect other particles that would clog your system.
Do Not Place the Machine Too Close to the Wall
It would be best to provide plenty of room for the supply lines and some space for the appliances. This means you shouldn’t position your washing machine very close to the wall to provide more space for the supply lines. The appliances should be at least an inch apart too.
It’s always better to do a full laundry instead of small loads every day to save water. If you have the regular washing machine, you would need about 41 gallons per load. Consider doing laundry at least once a week so you don’t waste water.
Do General Maintenance with Licensed Plumber
Schedule regular maintenance with a plumber at least once a year to thoroughly inspect your plumbing system. A plumber is highly skilled at catching minor problems that would turn into disastrous emergencies. It may be an extra cost but if a plumber is able to diagnose and resolve a smaller problem, you can actually save money as opposed to paying a plumber for serious damages down the road.
Contact Paul Bunyan Plumbing & Drains
You can count on a plumber at Paul Bunyan Plumbing & Drains in Minneapolis, MN. All our plumbers have several years of experience with all plumbing repairs and installations. It’s our commitment to offer “Comfort to Every Degree” for all our customers. Rest assured that we can resolve all plumbing-related concerns.
Call us today for an appointment!